Tomasz Libura, Judyta Sienkiewicz, Zbigniew Nowak, Zbigniew Kowalewski, Alexis Rusinek, George Voyiadjis, Urvashi Gunputh, Paul Wood, THE INFLUENCE OF BUILD PARAMETERS ON THE COLLAPSE BEHAVIOUR OF A HIGHLY POROUS RANDOM OPEN-CELL LATTICE 3D PRINTED IN IN718 ALLOY

10.46793/41DAS2025.003L

3-4

Stefan-Dan Pastrama, INFLUENCE OF STRINGER GEOMETRY ON THE STRUCTURAL INTEGRITY OF CRACKED STIFFENED PLATES

10.46793/41DAS2025.005P

5-6

Kristóf Havasi, Attila Kossa, IMPLEMENTATION AND PRACTICAL APPLICATION OF NONEQUIVALENT BIAXIAL MEASUREMENTS FOR HYPERELASTIC MATERIALS

10.46793/41DAS2025.007H

7-8

Karel Doubrava, Nikola Schmidová, David Blaha, Zdeněk Padovec, Ctirad Novotny, Radek Kottner, Radek Sedláček, Milan Růžička, GRP TANK LOADING INVESTIGATION USING CFS AND DFOS SENSORS

10.46793/41DAS2025.009D

9-10

Nikola Lalović, Thomas Böhlke, IDENTIFICATION OF ENERGETIC AND DISSIPATIVE FLOW STRESS USING INFRARED THERMOGRAPHY

10.46793/41DAS2025.011L

11-12

Florian Grün, Peter Oberreiter, Philipp Renhart, Michael Pusterhofer, NOVEL TEST METHODS FOR TRIBO/ MECHANICAL PROPERTIES IN THE CONTEXT OF ALTERNATIVE FUELS

10.46793/41DAS2025.013G

13-14

Dimos Triantis, Ilias Stavrakas, Ermioni Pasiou, Stavros Kourkoulis, THE DEPENDENCE OF THE DEGREE OF NON-ADDITIVITY OF MECHANICALLY LOADED SYSTEMS ON THE LOADING RATE

10.46793/41DAS2025.015T

15-16

Petra Bagavac, Marijo Bekić, Lovre Krstulović-Opara, IMPACT VELOCITY INFLUENCE ON THE FRACTURE BEHAVIOUR OF PORCINE FEMURS UNDER DYNAMIC LOADING

10.46793/41DAS2025.017B

17-18

Nenad Kolarević, Milosav Ognjanović, Miloš Stanković, Aleksandar Dimić, Nikola Davidović, Marko Miloš, EXPERIMENTAL ANALYSIS OF HIGH-SPEED GEARBOXES

10.46793/41DAS2025.019K

19-22

Robert Uścinowicz, EXPERIMENTAL STUDY OF HEAT EFFECT ON THE DEFORMATIONS OF AL/CU BIMETAL IN 3-POINT BENDING

10.46793/41DAS2025.025U

25-26

Cristian Lucian Ghindea, Radu Iuliu Cruciat, Andrei Gheorghe Pricopie, Adrian Aurelian Diaconu, Ionut Radu Racanel, DYNAMIC CALIBRATION OF A MODEL OF A MIXED STRUCTURE BRIDGE DECK BASED ON DYNAMIC TESTS OF THE BRIDGE

10.46793/41DAS2025.027G

27-28

Márton Kammerer, Attila Kossa, CONSTITUTIVE MODELLING OF POLYMER FOAMS USING AN ASYMMETRIC POISSON’S RATIO

10.46793/41DAS2025.029K

29-30

Nicolae Stefanoaea, Olivia-Laura Petrascu, Adrian Marius Pascu, MECHANICAL RESPONSE OF PA6 UNDER ENVIRONMENTAL CONDITIONS: A DUAL APPROACH USING EXPERIMENTS AND NUMERICAL ANALYSES

10.46793/41DAS2025.031S

31-32

Sophie Schmid, Olaf Lahayne, Bernhard Pichler, COMPARATIVE EVALUATION OF THE ELASTIC MODULUS IN CEMENT PASTES USING ULTRASONIC AND 3-MIN-CREEP TESTING

10.46793/41DAS2025.033S

33-34

Zsombor Magyari, Roland Zana, Dénes Takács, EXPERIMENTAL ANALYSIS OF ELECTRIC SOOTER DYNAMICS

10.46793/41DAS2025.035M

35-36

Levente Mihalyi, Denes Takacs, EFFECTS OF STEERING ANGLE SATURATION ON STABILITY OF REVERSING TRAILERS

10.46793/41DAS2025.037M

37-38

Muhammad Shahid, Sophie Schmid, Olaf Lahayne, Agathe Robisson, Bernhard Pichler, MULTITECHNIQUE CHARACTERIZATION OF CEMENT PASTE WITH AND WITHOUT GRAPHENE OXIDE

10.46793/41DAS2025.039S

39-40

Thomas Lehmann, Tobias Jähnichen, Jörn Ihlemann, ANALYSIS OF TEST STRAIN IN A FOUR-POINT BENDING CALIBRATION SETUP FOR STRAIN GAGES

10.46793/41DAS2025.041L

41-42

Péter Máté, András Szekrényes, STABILITY LOSS OF TAPE-SPRINGS UNDER COMPRESSIVE LOADS: A FINITE ELEMENT ANALYSIS

10.46793/41DAS2025.043M

43-44

Kata Ruzsa, Szabolcs Berezvai, EXPERIMENTAL AND NUMERICAL ANALYSIS OF LASER-CUT PNEUMATIC SOFT ROBOT STRUCTURES

10.46793/41DAS2025.045R

45-46

Kristóf Bányi, Zsófia Pálya, Mária Takács, Rita Kiss, OPTIMISING GAIT STABILITY ANALYSIS IN PATIENTS WITH MUSCULOSKELETAL DISORDERS

10.46793/41DAS2025.047B

47-48

Zbigniew Kowalewski, Mateusz Kopec, Grzegorz Garbacz, Adam Brodecki, ALTERNATIVE METHOD OF STRESS PARAMETERS DETERMINATION DURING TENSILE TESTS USING METRIC ENTROPY AND DIC

10.46793/41DAS2025.049K

49-50

Lukáš Horák, Jan Krystek, INFLUENCE OF TEMPERATURE ON MODE I FRACTURE TOUGHNESS OF A DUCTILE ADHESIVE

10.46793/41DAS2025.051H

51-52

Radim Halama, Michal Kořínek, Jiří Čapek, Karel Trojan, Radim Petkov, Adam Gladiš, Jiří Hajnyš, Nikolaj Ganev, INVESTIGATION OF RESIDUAL STRESS EVOLUTION DUE TO CYCLIC LOADING BY YIELD SURFACE TRACKING

10.46793/41DAS2025.053H

53-54

Miroslav Milutinović, Aleksandar Okilj, Sanjin Troha, DEVELOPMENT OF CONSTRUCTION FOR THE TRANSFER OF HEAVY PRISMATIC PROFILES

10.46793/41DAS2025.055M

55-56

Sanjin Troha, Kristina Marković, Željko Vrcan, Filip Šulj, Miroslav Milutinović, EXPERIMENTAL DETERMINATION OF THE EFFICIENCY OF A COMPOUND PLANETARY GEARBOX

10.46793/41DAS2025.057T

57-58

Agnieszka Rutecka, Zbigniew Kowalewski, EFFECT OF PRIOR CREEP ON TENSILE PROPERTIES OF AA2124/SiC COMPOSITES

10.46793/41DAS2025.059R

59-60

Zvonimir Tomičević, Borna Božović, Daniel Kytýř, Petr Koudelka, DETERMINATION OF FOUR CHARACTERISTIC REGIONS IN THE STRESS– STRAIN RESPONSE OF APM FOAM UNDER COMPRESSION USING DVC

10.46793/41DAS2025.061T

61-62

Milan Blagojević, Živče Šarkočević, Milan Bojović, Ivica Čamagić, DEVELOPMENT OF A TEST DEVICE (FIXTURE) FOR DETERMINING THE PULL-OUT FORCE OF SWAGED BALL TERMINATIONS ON CONTROL CABLES

10.46793/41DAS2025.063B

63-64

Milan Blagojević, Živče Šarkočević, Ivica Čamagić, QUANTITATIVE DETERMINATION OF GLASS FIBER CONTENT IN FIBER REINFORCED COMPOSITE MATERIALS

10.46793/41DAS2025.065B

65-66

Bogdan Todorović, Aleksandra Obradović, Nebojša Hristov, Damir Jerković, NUMERICAL ANALYSIS OF BARREL LOADS IN THE DESIGN PHASE OF AN ARTILLERY SYSTEM

10.46793/41DAS2025.067T

67-70

Dragan Rakić, Slobodan Radovanović, Miroslav Živković, AUTOMATION OF CONSTITUTIVE MODEL PARAMETER IDENTIFICATION

10.46793/41DAS2025.071R

71-74

Dušan Arsić, Gordana Jovičić, Miroslav Živković, Miloš Pešić, Marko Topalović, Đorđe Ivković, Marko Delić, FATIGUE PERFORMANCE COMPARISON OF STRENX 700 AND 55NiCrMoV7 STEELS

10.46793/41DAS2025.075A

75-78

Anđela Perović, Miloš Matejić, Vladimir Milovanović, EXPERIMENTAL DETERMINATION OF THE EFFECT OF AXIAL FORCE ON A HEADLESS SCREW CONNECTION

10.46793/41DAS2025.079P

79-82

Nikola Davidović, Nenad Kolarević, Milos Stanković, Marko Miloš, INITIAL EXPENDABLE TURBOJET PROTOTYPE TESTING EXPIRIENCES

10.46793/41DAS2025.083D

83-86

Jovana Antić, Žarko Mišković, Danilo Pejčić, Martin Dix, Alexander Pierer, Jürgen Heidrich, Matthias Milbrandt, HARDNESS MEASUREMENT OF ROLLING BEARING BALLS SUBJECTED TO MULTI-CYCLE CRYOGENIC TREATMENT

10.46793/41DAS2025.087A

87-90

Nenad Grujović, Strahinja Milenković, Fatima Živić, EXPERIMENTAL AND ANALYTICAL METHODS FOR DETERMINING INTERLAMINAR SHEAR STRENGTH OF COMPOSITES MADE BY FDM 3D PRINTING

10.46793/41DAS2025.091G

91-94

Fatima Živić, Marija Branković, Danilo Petrović, Petar Todorović, Nenad Grujović, MEASUREMENT OF PIEZOELECTRIC PROPERTIES OF HYDROGELS

10.46793/41DAS2025.095Z

95-98

Mirjana Piskulić, Rodoljub Vujanac, Nenad Miloradovic, Mirko Blagojevic, INFLUENCE OF PALLET PLACEMENT METHOD ON BEAM BEHAVIOR IN RACK STRUCTURE

10.46793/41DAS2025.099P

99-102

Snežana Joksić, Jovana Živić, Marija Matejić, Miloš Matejić, Živče Šarkočević, Ivica Čamagić, ANALYTICAL AND FEM ASSESSMENT OF A DOUBLE-SIDED BUTT WELDED S1000QL SPECIMEN FOR TENSILE TESTING PREPARATION

10.46793/41DAS2025.103J

103-106

Miloš Pešić, Aleksandar Bodić, Marko Topalović, Snežana Vulović, Vladimir Dunić, Vladimir Milovanović, Miroslav Živković, QUASI-STATIC TENSILE TESTING OF HIGH-STRENGTH BALLISTIC STEEL USING DIGITAL IMAGE CORRELATION – PRELIMINARY STUDY

10.46793/41DAS2025.107P

107-110

Miloš Pešić, Aleksandar Bodić, Marko Topalović, Snežana Vulović, Vladimir Dunić, Vladimir Milovanović, Miroslav Živković, QUASI-STATIC AND DYNAMIC BEHAVIOR OF VANADIUM-CARBIDE REINFORCED ALUMINUM ALLOY STUDIED VIA DIGITAL IMAGE CORRELATION – PRELIMINARY STUDY

10.46793/41DAS2025.111P

111-114

Aleksandar Bodić, Vladimir Milovanović, Miroslav Živković, Miloš Pešić, Dušan Milojević, Marko Topalović, EXPERIMENTAL VALIDATION OF FRICTION STIR WELDING PARAMETERS FOR EN AW 6060 T6 ALUMINUM ALLOY

10.46793/41DAS2025.115B

115-118

Dobrivoje Ćatić, Vladimir Ćatić, RESIDUAL STRESS-INDUCED DAMAGE IN BRAKE DRUMS

10.46793/41DAS2025.119C

119-122

Vladimir Milovanović, Stefan Dikić, Saša Spasenić, Mileta Ristivojević, Sreten Spasenić, Aleksandar Bodić, Miloš Pešić, INFLUENCE OF CRACKS ON THE STRUCTURAL STABILITY OF CYLINDRICAL STEEL EQUALIZATION TANKS

10.46793/41DAS2025.123M

123-126

Filip Nastić, Mladen Josijević, Davor Končalović, Dušan Gordić, Vladimir Vukašinović, STRUCTURAL ASSESSMENT AND REDISIGN OF THE WATER CHAMBER IN A DOMESTIC GASIFICATION BOILER

10.46793/41DAS2025.127N

127-130

Vladimir Kočović, Dragan Džunić, Sonja Kostić, Živana Jovanović Pešić, Milan Đorđević, Ljiljana Brzaković, Đorđe Vukelić, INFLUENCE OF FEED RATE ON SURFACE ROUGHNESS OF AL6088 ALLOY IN THE BALL BURNISHING PROCESS

10.46793/41DAS2025.131K

131-134

Živana Jovanović Pešić, Aleksandra Vulović, Strahinja Milenković, Đorđe Ilić, Dragan Džunić, EFFECT OF ELECTRON BEAM PROCESSING PARAMETERS ON THE SURFACE ROUGHNESS OF TITANIUM SAMPLES: PART II

10.46793/41DAS2025.135JP

135-138

Vladimir Dunić, Aleksandar Bodić, Miroslav Živković, 2D AXISYMMETRIC VS. 3D SOLID ELEMENT PHASE-FIELD DAMAGE MODELING

10.46793/41DAS2025.139D

139-142

Marko Delić, Vesna Mandić, Srbislav Aleksandrović, Dušan Arsić, Đorđe Ivković, ANALYSIS OF DEEP DRAWING PROCESS USING FEA AND FLD

10.46793/41DAS2025.143D

143-146

Mladen Josijević, Dušan Gordić, Davor Končalović, Filip Nastić, DEVELOPMENT AND EXPERIMENTAL TESTING OF A HYDRAULIC STAND WITH PUMPS INTENDED FOR A CENTRAL HEATING SYSTEM

10.46793/41DAS2025.147J

147-150

Vladimir Simić, Aleksandar Nikolić, Miljan Milošević, Shao Ning, Fransisca Leonard, Miloš Kojić, FINITE ELEMENT ANALYSIS OF PLATELET ACTIVATION AND CELL MECHANICS IN CIRCULATING TUMOR CELL ARREST

10.46793/41DAS2025.151S

151-154

Saša Milojević, Snežana Vulović, Marija Rafailović, Slobodan Savić, CONDITIONS RELATED TO THE ROOF STRUCTURE STRENGTH OF BUSES POWERED BY NATURAL GAS AND FUEL CELLS

10.46793/41DAS2025.155M

155-158

Pavle Ljubojević, Saša Stašević, CFD INVESTIGATION OF TURBULENT WATER FLOW IN A PIPE ELBOW: ASSESSMENT OF CAVITATION RISK

10.46793/41DAS2025.159LJ

159-162

Stefan Čukic, Slavica Miladinović, Anđela Perović, Lozica Ivanović, Saša Milojević, Blaža Stojanović, KINEMATIC ANALYSIS OF THE COMPLEX PLANETARY GEAR TRAIN OVERVIEW

10.46793/41DAS2025.163C

163-166

Dragan Džunić, Stefan Miletić, Milan Ivković, Slobodan Mitrović, IMPROVEMENT OF THE TECHNICAL AND OPERATIONAL CHARACTERISTICS OF ZA-27 ALLOYS REINFORCED WITH SIC AND AL₂O₃

10.46793/41DAS2025.167DZ

167-170

Ivan Simonović, Aleksandar Marinković, Jovana Antić, Nenad Kolarević, CHALLENGES OF ADDITIVE MANUFACTURING IN MACHINE ELEMENT APPLICATIONS

10.46793/41DAS2025.171S

171-174