Proceedings of 41st Danubia-Adria Symposium Advances in Experimental Mechanics (pp. 51-52)
АУТОР(И) / AUTHOR(S): Lukáš Horák 
, Jan Krystek
DOI: 10.46793/41DAS2025.051H
УВОД / INTRODUCTION:
The main goal of this study is to quantify the effect of temperature on Mode I fracture toughness for a ductile adhesive. Later, this set of material parameters was used to simulate a Double Cantilever Beam (DCB) sample with various shapes of Traction-separation models to better capture the gradual failure of the adhesive under different thermal operating conditions.
КЉУЧНЕ РЕЧИ / KEYWORDS:
ПРОЈЕКАТ / ACKNOWLEDGEMENT:
Work was supported by the project SGS-2025- 015 of the University of West Bohemia.
ЛИТЕРАТУРА / REFERENCES:
- Horák, L., Krystek, J. Methodology and Determination of Parameters for Modeling Brittle Adhesive. In Proceedings of the EAN 2024 – 62nd International Conference on Experimental Stress Analysis, Boží Dar, 4-6 June, 2024.
- Banea, M.D., da Silva, L.F.M. Adhesively bonded joints in composite materials: An overview. In Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2016, 223(1), pp. 1–18.
- Campilho, R.D.S.G., Pinto, A.M.G., Banea, M.D., Silva, R.F., da Silva, L.F.M. Strength Improvement of Adhesively-Bonded Joints Using a Reverse-Bent Geometry. Journal of Adhesion Science and Technology, 2011, 25(18), pp. 2351–2368.
- Dogan, F., Hadavinia, H., Donchev, T., Bhonge, P., Delamination of impacted composite structures by cohesive zone interface elements and tiebreak contact. Central European Journal of Engineering, 2012, 2(4), pp. 612–626.