XXIX kongres DIMK i X kongres SIGP sa Međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija (2025) [pp. 325-333]
AUTHOR(S) / АУТОР(И): Danica Đukić, Gvozden Jovanović 
, Marina Škondrić , Aleksandar Radević , Aleksandar Savić , Dragica Jevtić
Download Full Pdf 
DOI: 10.46793/29DIMK.325D
ABSTRACT / САЖЕТАК:
The paper presents a comparative analysis of eight concrete slabs prepared under laboratory conditions. The slabs were cast using formwork of varying quality, cured for 1 and 7 days, and compacted for 7s and 10 s. The comparison of properties, specifically the pore surface area of different diameters, was conducted using image analysis software. The results show that curing conditions had no significant effect on the surface characteristics of exposed concrete, while both the type of formwork and compaction duration demonstrated a more significant influence.
KEYWORDS / КЉУЧНЕ РЕЧИ:
exposed concrete, pore surface area, pore diameter, exposed concrete classes
ACKNOWLEDGEMENT / ПРОЈЕКАТ:
This research was funded by the Ministry of Science, Technological Development and Innovation of the Republic of Serbia and the University of Belgrade – Faculty of Civil Engineering (contract number 200092).
REFERENCES / ЛИТЕРАТУРА:
- M. Muravljov, D. Zakić, A. Radević, Tehnologija betona, teorija i praksa, Univerzitet u Beogradu ‒ Građevinski fakultet, Akademska Misao, 2022, ISBN: 978-86-7518-220-7
- DIN 18217:1981-12 Concrete surfaces and formwork surface (withdrawn)
- DBV-Merkblatt Sichtbeton, Deuthcher Beton und Bautechnik Verein E.V., Berlin 2015, Verein Deutscher Zementwerke e.V., Düsseldorf 2015.
- Jevtić D, Zakić D, Aškrabić M. Possibilities of building structures using exposed concrete factors of influence. in Contemporary Structures – Sustainable Development, Book of Abstracts of the 16th International Symposium of MASE. 2015;:69-70.
- Jevtić D, Logar M, Savić A: Investigation of the Self-Compacting Concrete With Fly Ash From the Microstructural Aspect, XXVII International Symposium on Research and Application of Contemporary Achievements in Civil Engineering in the Field of Materials and Structures, pp. 107-114, ISBN 978-86-87615-08-3, Vršac 18-20. October 2017
- Sosa J., Huber D., Welk B., Fraser H. (2014). Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization, Integrating Materials and Manufacturing Innovation, 3(1), 123-140, https://doi.org/10.1186/2193-9772-3-10