XXIX kongres DIMK i X kongres SIGP sa Međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija (2025) [pp. 72-81]
AUTHOR(S) / АУТОР(И): Ivan Glišović 
, Marija Todorović , Nađa Simović
Download Full Pdf 
DOI: 10.46793/29DIMK.072G
ABSTRACT / САЖЕТАК:
Eksperimentalno ispitivanje je sprovedeno u cilju utvrđivanja naponskog i deforamcijskog stanja panela od unakrsno lepljenog lameliranog drveta (CLT-a) izloženih savijanju van ravni kako bi se analizirali efekti različite orijentacije lamela u okviru poprečnih slojeva panela. Ispitani su paneli sa konvencionalnom orijentacijom lamela poprečnih slojeva pod uglom 90° u odnosu na lamele podužnih slojeva i paneli sa modifikovanom orijentacijom lamela poprečnih slojeva pod uglom ±45° u odnosu na lamele podužnih slojeva. Prednosti modifikovanog CLT-a su poboljšane mehaničke performanse i efikasnije korišćenje resursa uzimajući u obzir svojstva materijala. Ponašanje panela pri ekploatacionom i graničnom opterećenju opisano je sa aspekta veze opterećenje-ugib, oblika loma, nosivosti i krutosti.
KEYWORDS / КЉУЧНЕ РЕЧИ:
CLT, eksperimentalno ispitivanje, modifikovana orjentacija lamela, oblici loma
ACKNOWLEDGEMENT / ПРОЈЕКАТ:
Istraživanje je sprovedeno uz podršku Fonda za nauku Republike Srbije, broj projekta 7677448: Towards Sustainable Buildings: Novel Strategies for the Design of Vibration Resistant Cross-Laminated Timber Floors – Substrate4CLT.
REFERENCES / ЛИТЕРАТУРА:
- Arnold M., Dietsch P., Maerebner R., Winter S.: Diagonal laminated timber. Experimental, analytical, and numerical studies on the torsional stiffness. Construction and Building Materials 322 (2022) 126455, 2022.
- Buck D., Wang X., Hagman O., Gustafsson A.: Bending properties of cross laminated timber (CLT) with a 45° alternating layer configuration. BioResources 11(2): 4633-4644, 2016.
- EN 338: Structural timber – Strength classes. European Committee for Standardization, Brussels, Belgium, 2009.
- EN 408:2010+A1: Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties. European Committee for Standardization, Brussels, Belgium, 2012.
- EN 16351: Timber structures – Cross laminated timber -Requirements. European Committee for Standardization, Brussels, Belgium, 2015.
- Franzoni L., Lebée A., Lyon F., Foret G.: Influence of orientation and number of layers on the elastic response and failure modes on CLT floors: modeling and parameter studies. European Journal of Wood and Wood Products 74:671–684, 2016.
- He M., Sun X., Li Z., Feng W.: Bending, shear, and compressive properties of three‑ and five‑layer cross‑laminated timber fabricated with black spruce. Journal of Wood Science 66:38, 2020.
- Ido H., Nagao, H., Harada M. Kato H., Ogiso J., Miyatake A.: Effects of the width and lay-up of sugi cross-laminated timber (CLT) on its dynamic and static elastic moduli, and tensile strength. J Wood Sci 62(1):101–108, 2016.
- JCSS Probabilistic Model Code. Part 3: Resistance models – 3.5 Properties of timber. Joint Committee of Structural Safety, 2006.
- Kong, F., Zhou, B., An, X., Wang, F., Wang, S., Ma, P., Que, Z., 2024: Experimental investigation on mechanical properties of Chinese fir composites as cross-laminated timber. Industrial Crops and Products 213:118411, 2006.
- Li H., Wang L., Wei Z., Semple K.E., Dai C.: Out-of-plane bending behavior of cross-laminated timber members enhanced with fiber-reinforced polymers. Journal of Building Engineering 66:105862, 2023.
- Ma Y., Wang X., Begel M., Dai Q., Dickinson Y., Xie X., Ross R.J.: Flexural and shear performance of CLT panels made from salvaged beetle-killed white spruce. Construction and Building Materials 302:124381, 2021.
- Pang S.J., Jeong G.J.: Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floor. Construction and Building Materials 222:142-151, 2019.
- Ridley-Ellis D., Moore J., Khokhar A.M.: Random acts of elasticity: MoE, G and EN 408. WG Meetings COST Action E53 Quality Control for Wood and Wood Products and Wood Drying Seminar. Bled, Slovenia, 2009.
- Shen Y., Huang Z., Daneshvar H., Chui Y.H., Huang, D.: Experimental study of CLT panels under combined out-of-plane bending and compression. Engineering Structures 275, Part A, 115262, 2023.