37. саветовање CIGRE Србија (2025) СИГУРНОСТ, СТАБИЛНОСТ, ПОУЗДАНОСТ И RESILIENCE ЕЛЕКТРОЕНЕРГЕТСКОГ СИСТЕМА МУЛТИСЕКТОРСКО ПОВЕЗИВАЊЕ У ЕНЕРГЕТИЦИ И ПРИВРЕДИ – A1.02
АУТОР(И) / AUTHOR(S): Đorđe Jovanović, Zoran Ćirić, Ilija Klasnić, Denis Ilić, Zoran Božović
DOI: 10.46793/CIGRE37.A1.02
САЖЕТАК / ABSTRACT:
The initial technical paper, which is also in program of 37. Conference CIGRÉ Serbia, provides an overview of the basic technical parameters and characteristics of the new
turbo generator Unit B3 in TPP „Kostolac B“, rated power 412/350 (MVA/MW), which was first synchronized to the Serbian power system on January 26th, 2024. In this paper, which is continuation of already mentioned one, emphasis will be given to the scope of electrical and other testing as a part of prefabrication and fabrication stage and final acceptance testing (FAT) performed in manufacturer facilities as well as site acceptance test (SAT) and performance test after final installation of new generator Unit B3 on site in TPP Kostolac-B, before trial service. Finally, the scope and results of warranty testing before handover from EPS are also presented. Further, the platform for testing of the parameters of the assembled generator in the factory before delivery, as well as modern method for stator bars dimension checking and technique for modal analysis of stator endwinding stiffness are described.
The scope of testing and the guaranteed values of the parameters are defined by the contract signed between the supplier and the buyer of the generator (EPS AD), and all tests were conducted in accordance with the valid international standards for testing rotating electrical machines. The test results confirm the required quality because the values of parameters and characteristics of the generator are within the defined limits. The results of these tests should serve as a fingerprint for all future prophylactic tests.
КЉУЧНЕ РЕЧИ / KEYWORDS:
turbo generator, prefabrication testing, FAT, SAT, performance testing, warranty testing, guaranteed values
ЛИТЕРАТУРА / REFERENCES:
- VODIČ za primenu standarda i procedura za električna ispitivanja u procesu proizvodnje, isporuke i primopredaje opreme za TE Kostolac B3 – 1. faza – Knjiga 1/5: Energetski transformatori
- VODIČ za primenu standarda i procedura za električna ispitivanja u procesu
proizvodnje, isporuke i primopredaje opreme za TE Kostolac B3 – 1. faza – Knjiga 2/5: Obrtne mašine – generator - VODIČ za primenu standarda i procedura za električna ispitivanja u procesu
proizvodnje, isporuke i primopredaje opreme za TE Kostolac B3 – 1. faza – Knjiga 3/5: Obrtne mašine – 6 kV motori - VODIČ za primenu standarda i procedura za električna ispitivanja u procesu
proizvodnje, isporuke i primopredaje opreme za TE Kostolac B3 – 1. faza – Knjiga 4/5: Obrtne mašine – pobudni sistem generatora - VODIČ za primenu standarda i procedura za električna ispitivanja u procesu
proizvodnje, isporuke i primopredaje opreme za TE Kostolac B3 – 1. faza – Knjiga 5/5: Regulisana napajanja elektrostatičkih filtera - Inspection Test Plan of Kostolac-B Generator in SGP GN-ITP00 Q0A933F251 Rev J
- ITP No. GN-ITP09-S – Qualification Stator Coil
- IEC 60034-27-3: 2015 Rotating electrical machines – Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- ITP GN-ITP23-FSA Bushings
- IEC 60034-2 Rotating electrical machines – Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)