Proceedings of 41st Danubia-Adria Symposium Advances in Experimental Mechanics (pp. 91-94)
АУТОР(И) / AUTHOR(S): Nenad Grujović 
, Strahinja Milenković , Fatima Živić
Download Full Pdf 
DOI: 10.46793/41DAS2025.091G
УВОД / INTRODUCTION:
Fused Deposition Modeling (FDM) 3D printing of fiber-reinforced composites involves a complex interplay of materials, processing parameters, and environmental conditions that all influences resulting mechanical properties. Different measurement methods are used to evaluate these effects on the final materials properties and performance. This paper presents experimental and analytical methods for determining interlaminar shear strength of PLA/PVDF composites made by FDM 3D printing.
КЉУЧНЕ РЕЧИ / KEYWORDS:
ПРОЈЕКАТ / ACKNOWLEDGEMENT:
This paper is supported by the projects No. 451- 03-137/2025-03/200107 and No. 451-03-136/2025-03/200378, Ministry of Science, Technological Development and Innovation, Republic of Serbia.
ЛИТЕРАТУРА / REFERENCES:
- Li S, Cheng P, Ahzi S, Peng Y, Wang K, Chinesta F, et al. Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects. Compos Commun 2023, 40, 101592.
- Karimi A, Rahmatabadi D, Baghani M. Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review. Polymers 2024, 16, 831.
- Ismail KI, Yap TC, Ahmed R. 3D-Printed Fiber- Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques. Polymers 2022, 14, 4659.
- Khan S, Joshi K, Deshmukh S. A comprehensive review on effect of printing parameters on mechanical properties of FDM printed parts. Mater Today Proc 2022, 50, 2119–27.
- Njezic S, Zivic F, Savic S, Petrovic N, Pesic ZJ, Stefanovic A, et al. Analytical model of friction at low shear rates for soft materials in 3D printing. Technol Health Care 2024, 32, 3443–62.
- Milenkovic S, Slavkovic V, Fragassa C, Grujovic N, Palic N, Zivic F. Effect of the raster orientation on strength of the continuous fiber reinforced PVDF/PLA composites, fabricated by hand – layup and fused deposition modeling. Compos Struct 2021, 270, 114063.