37. саветовање CIGRE Србија (2025) СИГУРНОСТ, СТАБИЛНОСТ, ПОУЗДАНОСТ И RESILIENCE ЕЛЕКТРОЕНЕРГЕТСКОГ СИСТЕМА МУЛТИСЕКТОРСКО ПОВЕЗИВАЊЕ У ЕНЕРГЕТИЦИ И ПРИВРЕДИ – B5-07
АУТОР(И) / AUTHOR(S): Miljana Todorović, Pavle Krička
DOI: 10.46793/CIGRE37.B5.07
САЖЕТАК / ABSTRACT:
Capacitor banks are crucial for power factor correction and voltage stability improving the efficiency of the power system.
This paper presents a methodology for setting calculations of protection devices for shunt capacitor banks using a practical example. In this example, capacitor banks with an installed capacity of 140 MVAr are connected to a high‑voltage 345 kV network and configured in a grounded double wye formation. For the high‑voltage shunt capacitor bank protection, both primary and secondary relay protection systems were utilized. As the main protection function voltage differential protection has been used, while backup functions included phase and ground overcurrent protection with both inverse and definite-time elements, overvoltage and undervoltage protection, and an overvoltage element as permissive condition for power circuit breaker of capacitor bank to close. The criteria for setting these protection functions are presented in detail, along with calculations performed to this specific case. Since the primary protection device did not have factory-implemented voltage differential protection but supported protection free-form logic settings, the logic for voltage differential protection was programmed within the device. Considering the importance of the protected capacitor bank, the operation of the protection device was tested using real-time hardware-in-the-loop (RT-HIL). The paper describes the testing procedures and the results, which confirmed the correct operation of the capacitor bank voltage differential protection developed in freely programmable logic of the device.
КЉУЧНЕ РЕЧИ / KEYWORDS:
shunt capacitor bank, relay protection, RT-HIL testing
ПРОЈЕКАТ / ACKNOWLEDGEMENT:
ЛИТЕРАТУРА / REFERENCES:
- Goran Levačić, Ivo Uglešić, Alan Župan, Božidar Filipović-Grčić, „Problematika ugradnje kompenzacijskih uređaja u prijenosnoj elektroenergetskoj mreži“, 13. savjetovanje HRO CIGRE, Šibenik, 2017.
- Satish Samineni, Casper Labuschagne, and Jeff Pope, „Principles of Shunt Capacitor Bank Application and Protection“, 64th Annual Georgia Tech Protective Relaying Conference, Atlanta, Georgia, 2010
- Roy Moxley, Jeff Pope, and Jordan Allen, „Capacitor Bank Protection for Simple and Complex Configurations“, 65th Annual Conference for Protective Relay Engineers, College Station, Texas, 2012
- Gustavo Brunello, Bogdan Kasztenny, Craig Wester, „Shunt Capacitor Bank Fundamentals and Protection“, 2003 Conference for Protective Relay Engineers – Texas A&M University, College Station (TX), 2003
- Ariana Amberg and Jason Young, „Protecting a Grounded Fuseless Capacitor Bank With the SEL-487V“, SEL Application Guide, Volume IV, AG2010-08
- „IEEE Guide for the Protection of Shunt Capacitor Banks,“ in IEEE Std C37.99-2012 (Revision of IEEE Std C37.99-2000) , vol., no., pp.1-151, 8 March 2013, doi: 10.1109/IEEESTD.2013.6482148.
- SEL-451 Protection, Automation, and Bay Control System, Instruction Manual, Schweitzer Engineering Laboratories, 20250214
- SEL-487V Capacitor Bank Protection, Automation, and Control, Instruction Manual, Schweitzer Engineering Laboratories, 20250214