ODREĐIVANJE TERMIČKIH VELIČINA KOD PRAVOLINIJSKOG KLIZNOG LEŽIŠTA NA BAZI DISIPACIONE FUNKCIJE

Savetovanje o biotehnologiji sa međunarodnim učešćem (Čačak: 26 ; 2021) (str. 387-400)
 

AUTOR(I): Mirko Radić, Duško Kostić, Branko Pejović, Srđan Jović, Vladan Mićić

E-ADRESA:

Download Full Pdf   

DOI: 10.46793/SBT26.387R

SAŽETAK:

U prvom dijelu rada, izvedena je jednačina kontinuiteta u graničnom sloju za stacionarno dvodimenzionalno strujanje na bazi zakona o održanju mase. Nakon toga koristeći drugi Njutnov zakon za kontrolnu zapreminu, izvedena je jednačina za količinu kretanja. Koristeći izvedene jednačine, izvršena je analiza s obzirom na uticaj temperature. Nakon toga, na osnovu energetskog bilansa izvedena je energetska jednačina u kojoj je uvedena viskozna disipaciona funkcija, što je omogućilo širu primjenu. Na kraju rada, izvedene jednačine su primjenjene na konkretnom računskom primjeru iz tehničke prakse kod proračuna termičkih veličina kod pravolinijskog kliznog ležišta, što je bio i cilj rada

KLJUČNE REČI:

paralelno proticanje između dvije ploče, granični sloj, disipaciona funkcija, raspodjela brzina, gradijent temperature, toplotni fluks

LITERATURA:

[1]

R. V. Andrews, „Solvinf Conductive Heat Transfer Problems with Electrical-Analogue Shape Factors,“ Chemical Engineering Progress 5, p. 67, 1955.

[2]

R. Barron, Cryogenic Systems, New York: McGraw-Hill, 1967.

[3]

H. Blasius, „The Boundary Layers in Fluids with Little Friction (in German),“ Z. Math. Phys., pp. 1-37, 1950.

[4]

R. D. Blevin, Applied FLuid Dynamics Handbook, New York : Van Nostrand Reinhold, 1984.

[5]

W. Boyce and R. C. Diprima, Elementary differential equations and Boundary Value problems 4th ed., New York: John Wiley & Sons, 1986.

[6]

Y. A. Cengel and J. M. Cimbala, Fluid Mechanics: Fundamentals and Applications, New York: McGraw-Hill, 2006.

[7]

S. W. Churcill: and M. Bernstein, „A Correlatin Equation for Forced Convection from Gases and Liquids to a Circular Cylinder in Cross Flow,“ Journal of Heat Transfer 99, pp. 300-306, 1977.

[8]

L. S. Fletcher, „Recent Development in Contact Conductance Heat Transfer,“ Journal of Heat Transfer, pp. 1059-1079, 1988.

[9]

R. W. Fox and A. T. McDonald, Introduction to Fluid Mechanics 5th ed., New York: Wiley, 1999.

[10]

W. M. Kays and M. E. Crawford, Convective Heat and Mass Transfer 3rd ed., New York: McGraw-Hill, 1993.

[11]

D. Q. Kern and A. D. Kraus, Extended Surface Heat Transfer, New York: McGraw-Hill, 1972.

[12]

S. S. Kutateladze, Fundamentals of Heat Transfer, New York: Academic Press, 1963.

[13]

G. P. Peterson, „Thermal contact Resistance in Waste Heat Recovery Systems,“ in Proceeding of the 18th ASME/ETCE Hydrocarbon Processing Symposium, Dallas, 1987.

[14]

O. Reynolds, „On the Experimental Investigation of the Circumstances Which Determine Whether the Motin of Water Shall Be Direct or Sinuous, and the Law Of Resistance in Parallel Channels,“ Philosophical Transactions of the Royal Society of London, pp. 935-982, 1883.

[15]

H. Schlichting, Boundary Layer Theory 7th ed., New York: McGraw-Hill, 1979.

[16]

S. Song, M. M. Yovanovich and F. O. Goodman, „Thermal Gap Condutance of Conforming Surfaces in Contact,“ Journal of Heat Transfer, p. 533, 1993.

[17]

G. G. Stokes, „On the Effect of the Internal Friction of Fluids on the Motion of Pendulums,“ Cambridge Philosophical Transactions , 1851.

[18]

J. E. Sunderland and K. R. Johnson, „Shape Factors for Heat Conduction through Bodies with Isothermal or Convective Boundary Conditions,“ Trans. ASME 10, pp. 2317-2341, 1964.

[19]

W. M. Edmunds, „Residential Insulation,“ ASTM Standardization News, pp. 36-39, 1989.